# help abort copy - Aborts a copy volume operation. abort replication - Aborts the current replication operation for the specified replication set. abort scrub - Aborts a media scrub operation. abort verify - Aborts a media verify operation. activate firmware - Updates the firmware bundle stored inside the controller. add disk-group - Creates a disk group using specified disks. add host-group-members - Adds hosts to a host group. add host-members - Adds initiators to a host. add ipv6-address - Adds a static IPv6 address for a controller network port. add spares - Designates specified available disks to be spares. add volume-group-members - Adds volumes to a volume group. check firmware-upgrade-health - Checks that the system is ready for a firmware upgrade. check update-server - Checks the status of a configured update server. clear alerts - Clears all the alerts from the active list, and forces a fresh analysis of the system for any active alert conditions. clear cache - Clears unwritable cache data from both controllers. clear disk-metadata - Clears metadata from leftover disks. clear dns-parameters - Clears configured DNS settings for each controller module. clear events - Clears the event log in controller A, B, or both. clear expander-status - Clears the counters and status for SAS expander lanes. clear fde-keys - Clears the lock key ID and import lock ID used with full disk encryption. clear replication-queue - Clears the replication queue for a specified replication set. clear update-server-proxy - Clears the username, password, host, and port values configured for the update-server proxy and disables the proxy. copy volume - Copies all data in a specified source volume to a destination volume. create certificate - Creates or removes a custom security certificate. create host-group - Creates a host group that includes specified hosts. create host - Creates a host with an associated name. create peer-connection - Creates a peer connection between two storage systems. create remote-system - Creates a persistent association with a remote storage system. create replication-set - Creates a replication set for a specified volume or volume group. create schedule - Schedules a task to run automatically. create snapshots - Creates a snapshot of each specified source volume. create task - Creates a task that can be scheduled. create user-group - Creates a user group in the storage system to match an LDAP group. create user - Creates a user account.create volume-group - Creates a volume group that includes specified volumes. create volume-set - Creates a specified number of volumes in a pool. create volume - Creates a volume in a pool. delete all-snapshots - Deletes all snapshots associated with a specified source volume. delete host-groups - Deletes specified host groups and optionally all hosts in those host groups. delete hosts - Deletes specified hosts that are not in a host group. delete initiator-nickname - Deletes manually created initiators or the nicknames of discovered initiators. delete peer-connection - Deletes a peer connection between two storage systems. delete pools - Deletes specified pools. delete remote-system - Deletes the persistent association with a remote system. delete replication-set - Deletes a replication set. delete schedule - Deletes a task schedule. delete snapshot - Deletes specified snapshots. delete task - Deletes a task. delete user-group - Deletes an LDAP user group. delete user - Deletes a user account. delete volume-groups - Deletes specified volume groups and optionally all volumes in those groups. delete volumes - Deletes specified volumes. dequarantine - Removes a disk group from quarantine. exit - Log off and exit the CLI session. expand disk-group - Adds disks to a disk group to expand its storage capacity. expand volume - Expands a base volume. fail - Forces the partner controller module to crash for a non-maskable interrupt. help - Shows brief help for all available commands or full help for a specific command. map volume - Maps volumes to initiators. meta - In API mode only, shows all property metadata for objects. ping - Tests communication with a remote host. query metrics - Shows one or more collected data points for a list of metrics. query peer-connection - Queries a storage system to potentially use in a peer connection and shows information about the storage system via the in-band query. recover replication-set - Provides options to recover a replication set after a disaster. release volume - Clears initiator registrations and releases persistent reservations for all or specified volumes. remote - Runs a command on a remote system that is associated with the local system. remove disk-groups - Removes specifieremove host-group-members - Removes specified hosts from a host group. remove host-members - Removes specified initiators from a host. remove ipv6-address - Removes a static IPv6 address from a controller network port. remove spares - Removes specified spares. remove volume-group-members - Removes volumes from a volume group. replicate - Initiates replication of volumes in a replication set. rescan - This command forces rediscovery of disks and enclosures in the storage system. reset all-statistics - Resets performance statistics for both controllers. reset ciphers - Clears user-supplied ciphers and sets the cipher list to the system default. reset controller-statistics - Resets performance statistics for controllers. reset disk-error-statistics - Resets error statistics for all or specified disks. reset disk-statistics - Resets performance statistics for disks. reset dns-management-hostname - Resets each controller module's management hostname to the factory default. reset host-link - Resets specified controller host ports (channels). reset host-port-statistics - Resets performance statistics for controller host ports. reset pool-statistics - Clears resettable performance statistics for pools, and resets timestamps for those statistics. reset smis-configuration - Resets the SMI-S configuration files. reset snapshot - Replaces the data in a standard snapshot with the current data from its parent volume. reset volume-statistics - Resets performance statistics for all or specified volumes. restart mc - Restarts the Management Controller in a controller module. restart sc - Restarts the Storage Controller in a controller module. restore defaults - Restores the default configuration to the controllers. resume replication-set - Resumes the replication operations for the specified replication set. rollback volume - Replaces the data in a parent volume with the data from one of its snapshots. scrub disk-groups - Analyzes specified disk groups to find and fix errors. set advanced-settings - Sets advanced system configuration parameters. set alert - Acknowledges specified alerts. set ciphers - Configures a cipher list that the storage system can use to securely communicate with hosts through HTTPS or SMI-S. set cli-parameters - Sets options that control CLI behavior. set controller-date - Sets the date and time parameters for the system. set debug-log-parameters - Sets the types of debug messages to include in the Storage Controller debug log. set disk-group - Changes parameters for a specified disk group. set disk-parameters - Sets parameters that affect disk operation. set disk - Performs a secure erase onset dns-management-hostname - Sets a domain hostname for each controller module to identify it for management purposes. set dns-parameters - Configures settings to resolve domain names using the Domain Name Service (DNS). set email-parameters - Sets SMTP notification parameters for events and managed logs. set enclosure - Sets an enclosure's name, location, rack number, and rack position. set expander-phy - Disables or enables a specific PHY. set fde-import-key - Sets or changes the import lock key for the use of full disk encryption. set fde-lock-key - Sets or changes the lock key for the use of full disk encryption. set fde-state - Changes the overall state of the system for the use of full disk encryption. set host-group - Sets the name of a host group. set host-parameters - Sets controller host-port parameters for communication with attached hosts. set host - Sets the name of a host and optionally the profile of the host and the initiators it contains. set initiator - Sets the name of an initiator and optionally its profile. set ipv6-network-parameters - Sets IPv6 parameters for the network port in each controller module. set ldap-parameters - Configures the LDAP server parameters required to authenticate and authorize LDAP users. set led - Turns a specified device's identification LED on or off to help you locate the device. set network-parameters - Sets parameters for the network port in each controller module. set ntp-parameters - Sets Network Time Protocol (NTP) parameters for the system. set password - Sets a user's password for system interfaces (such as the CLI). set peer-connection - Modifies a peer connection between two systems. set pool - Sets parameters for a pool. set prompt - Sets the prompt for the current CLI session. set protocols - Enables or disables management services and protocols. set remote-system - Changes remote-system credentials stored in the local system. set replication-set - Changes parameters for a replication set. set schedule - Changes parameters for a specified schedule. set snapshot-space - Sets the snapshot space usage as a percentage of the pool and thresholds for notification. set snmp-parameters - Sets SNMP parameters for event notification. set syslog-parameters - Sets remote syslog notification parameters for events. set system - Sets the system's name, contact person, location, and description. set task - Changes parameters for a TakeSnapshot task. set update-server - Configures an update server and a proxy, if required. set user-group - Changes the settings for an LDAP user group. set user - Changes preferences for a specified user for the session or permanently. set volume-cache-parameters - Sets caset volume-group - Sets the name of a volume group. set volume - Changes parameters for a volume. show advanced-settings - Shows the settings for advanced system-configuration parameters. show alert-condition-history - Shows the history of the alert conditions that have generated alerts. show alerts - Shows information about the active alerts on the storage system. show audit-log - Shows audit log data. show cache-parameters - Shows cache settings and status for the system and optionally for a volume. show certificate - Shows the status of the system's security certificate. show ciphers - Shows the ciphers that the system is using to securely communicate with hosts. show cli-parameters - Shows the current CLI session preferences. show configuration - Shows system configuration information. show controller-date - Shows the system's current date and time. show controller-statistics - Shows live performance statistics for controller modules. show controllers - Shows information about each controller module. show debug-log-parameters - Shows which debug message types are enabled (On) or disabled (Off) for inclusion in the Storage Controller debug log. show disk-group-statistics - Shows live performance statistics for disk groups. show disk-groups - Shows information about disk groups. show disk-parameters - Shows disk settings. show disk-statistics - Shows live or historical performance statistics for disks. show disks - Shows information about all disks or disk slots in the storage system. show dns-management-hostname - Shows the management hostname for each controller module. show dns-parameters - Shows configured DNS settings for each controller module. show email-parameters - Shows email (SMTP) notification parameters for events and managed logs. show enclosures - Shows information about the enclosures in the storage system. Full detail available in API output only. show events - Shows events logged by each controller in the storage system. show expander-status - Shows diagnostic information relating to SAS Expander Controller physical channels, known as PHY lanes. show fans - Shows information about each fan in the storage system. show fde-state - Shows full disk encryption information for the storage system. show firmware-bundles - Displays the active firmware bundle and an available firmware bundle stored in the system's controller modules. show firmware-update-status - Displays the current status of any firmware update on the system. show frus - Shows SKU and FRU (field-replaceable unit) information for the storage system. show host-groups - Shows information about host groups and hosts. show host-phy-statistics - Shows diagnostic information relating to SAS controller physical channels, known as PHY lanes, for each host port. show host-port-statistics - Shows livshow initiators - Shows information about initiators. show inquiry - Shows inquiry data for each controller module. show ipv6-addresses - Shows static IPv6 addresses assigned to each controller's network port. show ipv6-network-parameters - Shows the IPv6 settings and health of each controller module's network port. show ldap-parameters - Shows LDAP settings. show license - Shows the status of licensed features in the storage system. show maps - Shows information about mappings between volumes and initiators. show metrics-list - Shows a list of all available types of metrics in the system. show network-parameters - Shows the settings and health of each controller module’s network port. show ntp-status - Shows the status of the use of Network Time Protocol (NTP) in the system. show peer-connections - Shows information about a peer connection between two systems. show pool-statistics - Shows live or historical performance statistics for pools. show pools - Shows information about pools. show ports - Shows information about host ports in each controller. show power-supplies - Shows information about each power supply in the storage system. show protocols - Shows which management services and protocols are enabled or disabled. show provisioning - Shows information about how the system is provisioned. show redundancy-mode - Shows the redundancy status of the system. show refresh-counters - Deprecated show remote-systems - Shows information about remote systems associated with the local system. show replication-sets - Shows information about replication sets in the peer connection. show replication-snapshot-history - Shows information about the snapshot history for all replication sets or a specific replication set. show sas-link-health - Shows the condition of SAS expansion-port connections. show schedules - Shows information about task schedules. show sensor-status - Shows information about each environmental sensor in each enclosure. show sessions - Shows information about user sessions on the storage system. show shutdown-status - Shows whether each Storage Controller is active or shut down. show snapshot-space - Shows snapshot-space settings for each pool. show snapshots - Shows information about snapshots. show snmp-parameters - Shows SNMP settings for event notification. show syslog-parameters - Shows syslog notification parameters for events and managed logs. show system-parameters - Shows certain storage system settings and configuration limits. show system - Shows information about the storage system. show tasks - Shows information about show tier-statistics - Shows live performance statistics for tiers. show tiers - Shows information about tiers. show unwritable-cache - Shows the percentage of unwritable data in the system. show update-server - Shows settings for a configured update server proxy. show user-groups - Shows configured LDAP user groups. show users - Shows configured user accounts. show versions - Shows firmware and hardware version information for the system. show volume-copies - Shows information about in-progress copy volume operations. show volume-groups - Shows information about specified volume groups or all volume groups. show volume-names - Shows volume names and serial numbers. show volume-reservations - Shows persistent reservations for all or specified volumes. show volume-statistics - Shows live performance statistics for all or specified volumes. show volumes - Shows information about volumes. show workload - Calculates the system's I/O workload, and shows the relationship between the workload and the amount of storage capacity used. shutdown - Shuts down the Storage Controller in a controller module. start metrics - Starts retention of specified dynamic metrics. stop metrics - Stops data retention for specified dynamic metrics. suspend replication-set - Suspends the replication operations for the specified replication set. test - Sends a test message to configured destinations for event notification and managed logs. trust - Enables an offline or quarantined-offline disk group to be brought online for emergency data recovery. unfail controller - Allows the partner controller module to recover from a simulated failure performed with the fail command (which requires the standard role). unmap volume - Deletes mappings for specified volumes. verify disk-groups - Analyzes redundant disk groups to find inconsistencies between their redundancy data and their user data. whoami - Shows domain information for the current user.
# show initiators Nickname Discovered Mapped Profile Host Type ID ------------------------------------------------------------------------- quvmesxi02_s2p0 Yes Yes Standard FC 100008f1eac08821 quvmesxi02_s3p0 Yes Yes Standard FC 100008f1eac078c3 quvmesxi04_s2p0 Yes Yes Standard FC 100008f1eac0887b quvmesxi04_s3p0 Yes Yes Standard FC 100008f1eac07818 quvmesxi06_s2p0 Yes Yes Standard FC 100008f1eac0883c quvmesxi06_s3p0 Yes Yes Standard FC 100008f1eac088de ------------------------------------------------------------------------- Success: Command completed successfully. (2024-07-22 15:22:54)
Show Volumes
1 2 3 4 5 6 7 8 9
# show volumes Pool Name Total Size Alloc Size Type Health Reason Action -------------------------------------------------------------------------- B QGOUAT-X86-MGT-50 5199.9GB 3560.8GB base OK A QGOUAT-X86-OS-01 2299.9GB 1203.6GB base OK A QGOUAT-X86-SHARE-01 3999.9GB 3997.9GB base OK B QGOUAT-X86-SHARE-02 2499.9GB 2282.3GB base OK -------------------------------------------------------------------------- Success: Command completed successfully. (2024-07-22 15:18:04)
# show system System Information ------------------ System Name: qusnmsas01 System Contact: Support System Location: 17/F, Queensway Government Office, Admiralty, Hong Kong System Information: QGO-UAT Midplane Serial Number: 00C0FF65A081 Vendor Name: HPE Product ID: MSA 2060 FC Product Brand: MSA Storage Enclosure Count: 1 Health: OK Health Reason: Other MC Status: Operational PFU Status: Idle Supported Locales: English (English), Spanish (español), French (français), German (Deutsch), Italian (italiano), Japanese (日本語), Korean (한국어), Dutch (Nederlands), Chinese-Simplified (简体中文), Chinese-Traditional (繁體中文)